The Chevy Silverado´s braking system operates v disc brakes, which call for the usage of strength brake boosters. Before disc brakes, preventing a truck compelled much much more effort compared to the contemporary systems that take advantage of a vacuum created by the truck´s engine. Simply like any type of truck part, the brake booster undergoes common wear and tear and can lose its volume to aid in braking. When this occurs, the is time to replace the brake booster and also regain your truck´s braking ability.

You are watching: Replace brake booster 1995 chevy truck


Lift the hood that the truck and also locate the grasp brake cylinder -- it is situated on the firewall, opposite of whereby the brake pedal is in the cabin of the truck. You have the right to identify the grasp brake cylinder by the brake lines that space attached come it; these brake lines run from the brake link through the truck´s firewall and also connect the brake booster to the master brake cylinder. Use a socket wrench come disconnect the master brake cylinder from the firewall, after which you will be able to disconnect the vacuum line that runs right into the brake booster -- this will isolate the booster so the it have the right to be gotten rid of later.


Position you yourself under the truck´s dashboard so the you can access the brake pedal. Making use of a flashlight, look at directly above the brake pedal. Friend will watch a small metal plate on the bottom of the dashboard, whereby the brake link connects the brake pedal to the piston that the understand brake cylinder. This key is hosted to the bottom that the dish through screws -- remove the screws with a screwdriver and also pull turn off the plate.


Remove the bolts the are situated behind the brake pedal. This bolts organize the brake booster to firewall. Go earlier under the hood and remove the brake booster and gasket from the firewall. After this, you can install the new gasket and brake booster -- push the gasket and then the brake booster into the firewall whereby the old booster was located and also then go back under the dashboard to secure the booster in location with the bolts that were formerly removed.


Re-attach the vacuum heat to the new brake booster and then bolt the understand brake cylinder ago onto the firewall. ~ you have done this, re-attach the steel plate under the dashboard to re-establish the connection in between the brake pedal and also the master brake cylinder.

See more: Where To Find Wpa Key For Ps3 Wireless Connection? Where Do I Find My Wpa Key For Ps3


Based in Colorado, Cecil Fontaine has actually been writing and also editing due to the fact that 2009, specializing in Brazilian travel guides. He received his Bachelor of arts in political economic situation from the college of California, Berkeley in 2008.