*
*
A pair that jack stands
*
*
*
A jack to lift the car
*
*
Genuine 5149098AA Oil push Switch
*
*
*
1/2-Inch drive 27mm deep socket
*
*
*
1/2-Inch drive ratchet
*
*
*
A 1/2-Inch universal joint
*
*
*
Eventually a 1/2-Inch drive extension bar
*
*
*
15mm wrench
*

*
A defective oil push sensor switch may cause an oil leak. The oil light might come on and a P0522 error code can be review on your OBD-2 scan tool.

You are watching: Pt cruiser oil sending unit location

You can replace this sensor there is no draining oil.

You must lift your vehicle onto jack stands.

*
Let your engine cool off prior to working under your vehicle because the oil sensor switch is hard to reach and you can burn your skin.

See more: 2002 Hyundai Elantra Power Steering Fluid To Use On 2002, What Power Steering Fluid To Use On 2002

Go under your automobile and shot to discover the oil sensor switch. It’s situated to the left the the oil drainpipe plug behind some electric harness:

*
In the next picture, you have the right to see the sensor connector:

*
With the 15mm wrench, eliminate the harness assistance (white arrowhead on the following picture):

*
You will have actually you much more room to reach the oil sensor
*
To acquire the wiring off, you have to slide the red clip (as present in the following picture):

*

You can push ~ above the connector and also get the wiring off:

*

You deserve to now usage the 27mm deep socket to remove the sensor. No so much room to work, for this reason you might use a universal joint and also eventually an extension bar.