How to replace the Belt on The 4.6L and also 5.4L Ford F-150

Nothing is much more annoying than a squealing belt. Squealing upon start up is the first sign that the serpentine belt requirements to it is in replaced. Eventually, the noise will stop going far after begin up and also will happen continuously. Replacing the belt is reasonably straight forward, together all that"s required is a 1/2 customs breaker bar or belt remove tool. A belt removal tool is favorable due to the fact that it appears to fit the 1/2" square journey on the belt tensioner much more securely. The tensioner is do of soft aluminum and easy to strip, but it is likewise not complicated to replace.

You are watching: How to install a serpentine belt on a ford f150


Applicable design Years: 1997 - 2010 4.6L & 5.4L fitted Ford F-150 Serpentine Belt component Number: view chart below Serpentine Belt Removal/Installation Tool: OTC 4645


Related Topics:


4.6L, 5.4L V-8 Serpentine Belt Replacement
1997 - 2003 F-150 Fuel Filter Replacement

4.6L and also 5.4L Ford V-8 Serpentine Belt part Number Chart

Model Year(s)

Engine(s)

Ford part Number

Application Notes

1997 - 2001

4.6L V-8

Motorcraft JK8996AA

with AC

1997 - 2001

4.6L V-8

Motorcraft JK8803

without AC

2002 - 2003

4.6L V-8

Motorcraft JK6996E

with AC

2002 - 2004

4.6L V-8

Motorcraft JK6803

without AC

2004

4.6L V-8

Motorcraft JK61022AA

with AC

2005 - 2006

4.6L V-8

Motorcraft JK61031AB

with AC

2005 - 2008

4.6L V-8

Motorcraft JK6847AA

without AC

2007 - 2008

4.6L V-8

Motorcraft JK61037A

with AC

2009 - 2010

4.6L V-8

Motorcraft JK61033

with AC

1997 - 1998

5.4L V-8

Motorcraft JK8996AA

with AC

1999 - 2001

5.4L V-8

Motorcraft JK8803

without AC

1999 - 2001

5.4L V-8

Motorcraft JK81006A

with AC

2002 - 2003

5.4L V-8

Motorcraft JK6996E

with AC

2002 - 2004

5.4L V-8

Motorcraft JK6803

without AC

2004

5.4L V-8

Motorcraft JK61022AA

with AC

2005 - 2006

5.4L V-8

Motorcraft JK61031AB

with AC

2005 - 2008

5.4L V-8

Motorcraft JK6847AA

without AC

2007 - 2008

5.4L V-8

Motorcraft JK61037A

with AC

2009 - 2010

5.4L V-8

Motorcraft JK61033

with AC

Note - chart over does not incorporate factory super charge engines (Lightning, Harley Edition).

Serpentine Belt Removal and also Installation Procedures

Click any type of thumbnail to view high resolution fullsize picture w/ addition details (where applicable)


*

• Make certain you have the exactly belt length and also rib count. These vary depending on model year and engine configuration.

• find the belt tensioner. On ours 4.6L, the belt tensioner assembly is situated passenger next on the former of the engine (just listed below the alternator).

• Insert your 1/2 inch drive breaker bar or belt tensioner tool (preferred) right into the front of the tensioner. The tensioner is made of very soft cast aluminum, so ensure your device is fully inserted before continuing.


*

• revolve the tensioner clockwise (towards driver side) to release anxiety on the belt. While maintaining pressure on the tensioner, slide the belt off of the top pulley. Relax the tensioner and completely remove the old belt.

• examine the diagram found on the fan shroud or in her owner"s manual and also begin installing the new belt to those specifications. It is critical that the belt is installed per this diagram.

See more: Quick Answer: What Does Otc Mean In Text Messages, What Does Otp Mean In Text

• girlfriend should have actually the belt mounted with the exception of the height pulley (alternator, in ours instance). As soon as again usage your 1/2 customs drive device to relax the tensioner. This should permit you ample room to install the belt over the critical pulley.

• with the belt totally installed, release the tensioner and twin check her work. Make sure the belt is set up properly on all pulleys.