Hello: I have actually a 1991 Dakota, the ignition switch has gone bad. It will certainly not longer start. The tumbler just spins around. I have actually bought the brand-new parts however I am can not to acquire the old ignition switch out. It has some form of defense screws stop it come the steering column. I borrowed a (security) torx head driver from our mechanic at UPS. The hole in the torx driver despite is smaller sized than the one in the center of the screws. Where execute I get the correct tool so I deserve to replace the ignition switch and also tumbler?

Where are these screws located? I"ve had several apart end the years, however never had that problem.Let me know.
*

The (3) screws space the ones holding the main ignition move to the column. I guess they need to be security kind screws or someone might just purchase a brand-new ignition and switch it with yous and also steal your car. They space torx head screws v the point protruding native the an extremely center that the screw. I will require some form of torx head through a feet drilled within of it. Prefer I stated previously, I borrowed a collection of Snap-On devices that have actually this hole. However the hole in the torx bit is not huge enough to work. The pin head in the center of the screw is too large. Go anyone understand where I have the right to buy the correct device to eliminate these (3) screws hold the ignition switch to the column? Thx

They space tamper proof. I just discovered it. The only place that I deserve to tell you to acquire the device is a dealer. I can"t even discover a component number because that it. I did uncover this:http://www.widgetsupply.com/page/WS/PROD/screwdriver-tamper-proof/BCU13Take a look at them and also see if girlfriend think they will work. I believe you need a T20. Also, I have actually read plenty of articles around breaking the center pin through a punch, however I don"t recognize if the is the ideal idea. Simply to be sure, look in ~ the snapshot below and let me understand if I have actually the right part you are looking for.

You are watching: How to change ignition switch on 1992 dodge dakota

*

Joe
Electrical problem 6 Cyl 2 Wheel journey Automatic 100000 MilesI need to Replace The Ignition Lock Cylinder and also Have removed The...
I understand I have actually Power from The Battery getting to The Ignition Switch, since I have the right to Turn The Engine over By using The Ignition vital Switch. Why...
My 1995 dodge Dakota V8 eco-friendly Colored got Keyed on The Front drivers Door near The Bottom the The Door. That Looks favor A Scratch, but I Know...
I recognize This Is most likely A Dumb Question. Yet Here go Anyway. There Is A brief In This Circuit i Realize. The Weather Is very Wet. My Radio...

See more: Who Is Bethany Joy Lenz Husband, Children: Facts Surrounding Her Love Life


If mine Ignition move Is negative Could It reason My van To Die and Not Restart because that A few Hours. Im not Getting any kind of Spark After the Dies. Ns Did...