Power Steering Pump replacement Service

How lot does a power Steering Pump instead of cost?

On average, the cost for a Ford emphasis Power Steering Pump instead of is $259 through $126 for parts and also $133 because that labor. Prices may vary depending on your location.

You are watching: Ford focus power steering pump replacement cost

CarServiceEstimateShop/Dealer Price
2012 Ford FocusL4-2.0LService typePower Steering Pump ReplacementEstimate$1171.03Shop/Dealer Price$1360.68 - $1805.87
2000 Ford FocusL4-2.0LService typePower Steering Pump ReplacementEstimate$490.42Shop/Dealer Price$582.82 - $810.43
2015 Ford FocusL4-2.0LService typePower Steering Pump ReplacementEstimate$728.56Shop/Dealer Price$883.24 - $1302.20
2009 Ford FocusL4-2.0LService typePower Steering Pump ReplacementEstimate$443.13Shop/Dealer Price$533.28 - $770.00
2007 Ford FocusL4-2.3LService typePower Steering Pump ReplacementEstimate$433.63Shop/Dealer Price$522.83 - $758.85
2005 Ford FocusL4-2.0LService typePower Steering Pump ReplacementEstimate$506.42Shop/Dealer Price$602.82 - $842.43
2002 Ford FocusL4-2.0LService typePower Steering Pump ReplacementEstimate$487.82Shop/Dealer Price$576.52 - $793.70
2011 Ford FocusL4-2.0LService typePower Steering Pump ReplacementEstimate$500.62Shop/Dealer Price$596.29 - $837.15

What is the strength steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump the generates the hydraulic pressure necessary to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and also pinion form unit, wherein the hydraulic press pushes on the steering rack, considerably reducing the effort it would otherwise take it to revolve the steering wheel.


When to think about replacing the power steering pump:

Groaning or whining noise when turning. Noise can happen if over there is wear on the pump bearings or impeller vanes. A low fluid level or trapped waiting can likewise cause noises. If the pump has already been operation while dry, including fluid might not settle the noise and also replacement that the pump can be necessary.Power steering liquid leaks. Leaks can build at pump seals, threaded connections, hoses, or ~ above the steering rack and also pinion unit. Pump seal leaks will generally require a replacement.Difficult steering. should you notice it is more tough to rotate the steering wheel, it can mean the strength steering pump output push is as well low, or there could be blockages in the pump or lines. Damage come the pump pulley. need to the pump pulley come to be damaged or is loose on the pump shaft, you can detect vibration, drive belt damage, or tough steering. One of two people the pulley-block will need to be serviced or the pump assembly replaced.

See more: Midol A Cure For What Happens If A Male Takes Midol A Cure For What Ails Men

How carry out mechanics change the strength steering pump?

If driven by a drive belt, the power steering pump is bolted come the engine via a clip that allows for convey of the pump journey belt. When the engine is cold, and safe to work on, the drive belt is removed.If moved by an electrical pump, the pump might be an installed in conjunction with the steering column or in conjunction through the steering rack. With either a drive belt or electrical pump, remove of any type of dash, panel, or steering materials is perform to access the pump.The threaded connectors come the pump inlet and outlet space loosened and removed.Any mounting bolts and brackets are eliminated so the pump can be removed.If the old pump has actually failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the mechanism is flushed. The new pump is bolted on, the pressure and return hoses attached and the system is bled of every air. If pump is belt-driven, it is tightened to the manufacturer’s specification.Finally, the engine is run and also the car is roadway tested come confirm regular steering effort. If a new drive belt to be installed, belt anxiety is measure up again, and readjusted as needed, after the belt has actually run for a few minutes.

Is it safe to drive v a strength steering pump problem?

No. If the strength steering pump is operated without an sufficient amount the fluid, and the pump reservoir will not hold fluid due to a large leak. The pump can seize, which would certainly snap the serpentine belt and also likely leaving you stranded. If the pump turns and also there is sufficient fluid, yet there is no strength assist, it will require lot greater effort to turn the steering wheel, and that presents natural safety risks. Generally, the wisest food is come seek prompt repairs if you suspect a difficulty with any type of component in your car’s strength steering system.

When instead of the strength steering pump save in mind:

Any belts steering the pump should be inspected and replaced as needed. The pump will certainly only create the forced hydraulic press if it is driven by the belt at an adequate speed. Strength steering leaks from age rubber hoses, an especially where the rubber is crimped come the steel tube, space not unusual and also should be very closely inspected. The system operates under high pressure. The liquid is flammable, and if leaking liquid happens to contact a hot engine part, a fire could result. You always want to be sure the hoses and also connections space sound.

Fast and easy organization at your residence or office