You are watching: Best paint for ping pong table
Step 1 - Get the Tools and Supplies
Gather all the devices and also provides for this task first. You will need primer as well as dark green and also white alkyd, or chalkboard, paint for the surface. The matte finish will minimize glare, and also it is additionally sturdy and scratch-resistant. Pick up two various widths of painter"s tape also and some paintbrushes or a paint roller and tray.Step 2 - Repair Any Damage
Before you begin painting, inspect for any kind of gouges or scratches that need repairs. Apply lumber filler with a putty knife if the damages is deep, and then sand the surconfront and also wipe amethod the sawdust for a clean surconfront. Take this time to remove any old paint from the table too if tbelow is any type of. A clean piece of sandpaper will certainly remove any kind of loose or cracked paint and also any kind of finish that should interfere through the new coat.Step 3 - Paint the Primer
Apply an also coat of the primer to the entire tableoptimal. Allow it to dry totally according to the directions on the label of your product.Tip 4 - Lay Tape for the White Lines
The side lines and the finish line are set alengthy the edges of the ping pong table. All these lines are 3/4-inch thick, the side lines run the size of the table while the end lines run the width. There is also a facility line that must be recorded. It is 1/8-inch thick and also it runs dvery own the length of the table in the middle.
Once the primer has actually dried completely, measure the width of the table and mark the exact facility along the length. This is wbelow the facility line will certainly be situated. Using the 1/8-inch wide painter"s tape, a strip lengthwise from one finish of the table to the various other, maintaining them as right as possible. Press the tape down firmly so that green paint will certainly not seep underneath it. Then, utilizing the 3/4-inch painter"s tape, run strips alengthy all 4 edges of the table.Step 5 - Add the Eco-friendly Paint
Apply 2 coats of the green chalkboard paint, making sure that the initially coat has actually dried according to the manufacturer’s instructions before you apply the second.
See more: Blue Nose Pitbull Brown And White, American Pit Bull Terrier Pictures 7
When the green paint is entirely dry, carefully rerelocate the masking tape from the table top. Using a tiny paintbrush, exceptionally carefully use two coats of the white paint within the lines, permitting it to dry totally between coats. If you are not sure that you will certainly have the ability to free hand also paint the white lines, you can run even more masking tape along the external edges of the location wbelow the white paint goes. If you carry out this, be exceptionally mindful once you rerelocate the tape so that you perform not peel away any kind of of the green tape.