Many type of Ford Explorers and also Mercury Mountaineers were manufactured through an choice well-known as the Ford keyless entry keypad. Some models describe it as SecuriCode as well. It is a five-button numeric keypad that is offered to:

Eliminate fumbling for your keysPrevent lockoutsProvide straightforward entry to your vehicle

The keyless entry provides a five-digit code to unlock the doors once it is gone into effectively. The five-digit code deserve to be changed from the default code collection at the factory to a user-defined code. The users can collection it to whatever before sequence they desire, giving much better protection and a code they will certainly remember.

It have the right to occur that the code you set is forobtained, and you are locked out of your auto. It is likewise a continual incident that, as soon as a vehicle has actually been sold, the code isn’t given to the new owner. If the default code isn’t on hand also either, it can leave the keymuch less keypad useless and also increase the chance of being locked out of your vehicle.

On Ford Explorers and Mercury Mountaineers, it may be possible to retrieve the five-digit default code manually via a few easy steps.

Method 1 of 5: Check your documentation

When a Ford Explorer or Mercury Mountaineer is offered through the keyless entry keypad, the default code is provided via the manuals and also owner’s materials on a card. Retrieve your code from the paperjob-related.

You are watching: 2002 ford explorer keyless entry code location

Tip 1: Look in your owner’s manual. Flip via the peras to discover the card via the code published on it.

If you purchased the vehicle second-hand also, examine if the code is created on the inside cover by hand.

Tip 2: Check your card wallet. Look in the card wallet you were gave from the dealer.

The code card may be loose in the wallet.

Tip 3: Check your glove box. The code card may be loose in the glove box, or the code might be composed on a sticker in the glove box.

Step 4: Go into the code. To enter your keymuch less keypad code:

Go into in the five-digit code in orderSelect the linked essential to pressPress the 3-4 switch within five seconds of entering your code to unlock your doorsLock your doors by pushing the 7-8 and also 9-10 butloads at the exact same time

Method 2 of 5: Locate smart junction box (SJB) 2006-2010

On Ford Explorers and also Mercury Mountaineers from 2006 until the model year 2010, the default five-digit keypad code is published on the smart junction box (SJB) under the driver’s side of the dash.

Materials Needed

FlashlightScrewdriver or small socket setSmall mirror on an extension

Tip 1: Look at your under dash. Open the driver’s door and lay on your ago in the driver’s footwell location.

It is cramped for area and you will certainly obtain dirty if the floor is dirty.

Step 2: Take off the under dash cover. Remove the under dash cover if there is one in location.

If tbelow is one, you may need a screwdriver or a tiny socket set and also ratchet to remove it.

Step 3: Locate the SJB module. It is a large black box installed up underneath the dash over the pedals. Tbelow is a long yellow wiring connector that plugs right into it 4-5 inches in width.

Step 4: Locate the barcode label. The label is directly listed below the connector facing the firewall.

Use your flashlight to find it under the dash.

Step 5: Find the code on the module. Locate the five-digit default keypad code on the module. It is under the barcode and is the just 5 digit number on the label.

Use your extendable mirror to get a watch of the backside of the module to read the label.

When the area is illuminated through the flashlight, you should easily be able to read the code in the mirror’s reflection.

Tip 6: Get in the code on the keypad.

Method 3 of 5: Locate the RAP Module

The default keypad code for Explorers and also Mountaineer for design years 1999 to 2005 deserve to be uncovered on the Remote Anti-Theft Personality (RAP) module. There are two feasible areas for the RAP module.

Materials Needed

FlashlightSmall mirror on an extension

*

Step 1: Find your tire adjust compartment. On a lot of 1999 to 2005 Explorers and also Mountaineers, you deserve to uncover the RAP module in the compartment wright here the tire readjust jack is situated.

Step 2: Locate the cover for the jack. The cover will be on the driver’s rear in the cargo area.

It is roughly 4 inches tall and also 16 inches wide.

Step 3: Rerelocate the cover. Tbelow are two lever-style connectors that host the cover in area. Lift both levers to release the cover and also lift it out of area.

Tip 4: Find the RAP module. It is located simply in front of the jack compartment opening, installed versus the side body panel.

You won’t have the ability to view the label plainly from this vantage allude.

Step 5: Read the default keymuch less code. Shine a flashlight as best you deserve to on the label, then usage a mirror on an expansion to check out the code off the label. It is the just five-digit code on there.

Tip 6: Install the jack cover. Placed the two bottom alignment tabs in area, press the panel right into its area, and also press the 2 levers down to lock it in place.

Step 7: Go into the keyless code.

Method 4 of 5: Find the RAP module on the rear passenger door

Material Needed

Flashlight

*

Step 1: Find the passenger seat belt panel. Locate the panel wright here the passenger rear seat belt enters the pillar location.

Tip 2: Pry the panel loose by hand also. Tbelow are a couple of stress and anxiety clips that hold it in place. A firm tug from the height must pop the panel off.

Warning: The plastic deserve to be sharp, so you might want to use gloves to remove trim panels.

Step 3: Rerelocate the seatbelt retractor panel. Pull the panel spanning the seat belt retractor ameans. This panel is directly below the one you pulled off.

You don’t need to totally rerelocate this component. The module is appropriate listed below the various other panel you rerelocated.

Tip 4: Look for RAP module. Shine a flashlight behind the panel. You will view a module through a label on it which is the RAP module.

Step 5: Get the five-digit code. Read the five-digit code off the label, then snap all the panels earlier in place, lining up the stress and anxiety clips with their places in the body.

Tip 6: Go into the default keypad code in the keypad.

See more: How Do You Say I Am Ok In Spanish ? How Would You Say I'M Fine In Spanish

Method 5 of 6: Use the MyFord function

Newer Ford Explorers might usage a touchscreen display screen mechanism recognized as MyFord Touch. It controls comfort and convenience systems consisting of SecuriCode.

Tip 1: Press the "Menu" button. With the ignition on and also the doors closed, press the “Menu” switch at the peak of the screen.

Step 2: Press the “Vehicle” button. This shows up on the left side of the display.

A menu comes up that consists of the alternative “Door Keypad Code.”

Tip 3: Select “Door Keypad Code” from the choice list.

Step 4: Set your keypad code. Go into the default keypad code from your owner’s manual, then enter your new personalized five-digit keypad entry code.

It is now set.

Method 5 of 5: Contact your Ford dealership

If none of the alternatives were successful in retrieving your default keymuch less keypad code, you will need to go to the Ford dealer to have a technician retrieve the code from the computer. The technician will use a diagnostic scanner to retrieve the code from the RAP or SJB module and provide it to you.

Usually, dealers charge a fee for retrieving keypad codes for customers. Ask ahead of time what the charge is for the organization and be ready through payment once the procedure has actually been completed.